Preorders are open. $39.99 a pair, two sizes, five colorways. Reserve a pair.
Home›Field notes›Behind the brand›How Newt Boots Are Made: Cut and Sewn in the Pacific Northwest
Field note Nº 15 · Behind the brand · · 5 min

How Newt Boots Are Made: Cut and Sewn in the Pacific Northwest

How Newt Boots are made: waterproof crawling booties cut and sewn in small runs in Hood River, Oregon, sampled with real crawlers and local sewing shops, and why we run small.

Newt Boots are waterproof crawling booties, cut and sewn in small runs in the Pacific Northwest, then inspected and packed by hand before they ship. We are a new company and our runs are small, measured in hundreds of pairs, not tens of thousands. This post walks through how a pair comes together, what we got wrong on the way, and why we are choosing to make them this way for now.

We are writing this partly because people ask, and partly because "made in the PNW" is a phrase that deserves some detail behind it.

Starting from the crawling stage, not a shoe last

Most children's footwear is designed by shrinking an adult shoe. You take a last, the foot-shaped form a shoe is built around, and scale it down. That works fine for a five-year-old. It works badly for a nine-month-old, whose foot is short, wide, soft and attached to a very round ankle, and who does not walk at all. A crawler's foot points backward, drags across the ground, and spends most of its time toes-down in whatever the ground is covered with.

We started from the other direction. We measured the feet of crawling babies from six to eighteen months, looked at the ranges, and drew two sizes that cover that window: 6 to 12 months, cut for a foot of about 100 to 115 mm, and 12 to 18 months, cut for a foot of about 115 to 127 mm. The shape is wider and rounder than a shoe, and the booties are made to go on over a rain suit: suit first, then the booties. The rest of the fit story is on our how they work page and in the sizing guide.

Getting the patterns right took longer than anything else. The first samples fit beautifully on the table and came off the first real baby who crawled across a wet lawn in them.

The materials

We are deliberately not publishing a spec sheet of linings, seam treatments and sole thicknesses here. The booties are in preorder, and we would rather tell you what a shipped pair is made of than what a sample was. What we can say now is what we know: they are waterproof, they are made for crawling, and they are worn over a rain suit. The general question of what makes any baby boot waterproof, and how to test one at home, is in what waterproof really means.

None of the materials are exotic. The work is in how they go together.

For amphibious babies.

Waterproof crawling booties, $39.99. Two sizes, five colorways. Preorders open.

Preorder

Cutting

Each run starts with cutting. Pieces are cut from stacked layers of fabric using the graded patterns for each size. For runs our size, that is done with a hand-guided cutter rather than an automated table, which means the person cutting is checking grain and alignment on every stack. Pieces are bundled by size and color and labeled, because a 6 to 12 month left and a 12 to 18 month left look similar on a table and very different on a baby.

Sewing

The sewing is done by small sewing shops here in the Pacific Northwest. We are not naming them in this post because they are small businesses with their own customers and we would rather not speak for them, but we work in the same rooms as the people doing the sewing, and when something is off we hear about it the same day.

Keeping water out

A sewn seam is a row of tiny holes, and on anything waterproof that is the main leak path. Closing those holes is the step we spent the most time on in development and the one we check on every pair before it leaves. We fill samples with water and run them through the wash to find what holds. We will publish the construction details once the first production run has shipped and we know they describe the booties you will actually receive.

Finishing

Each bootie is checked for stitch quality and symmetry with its partner. Then pairs are matched, tagged with the size card, and packed. The packing is done by us.

Sampling with real babies

Between the first pattern and the first run there were many rounds of samples. Each round went out to families with crawling babies who agreed to use the booties hard and tell us what broke, what came off and what annoyed them. The feedback changed the booties in specific ways: the shape of the opening, how they sit over a rain suit leg, and which sample materials survived a month of crawling across wet grass and gravel.

We are keeping this loop going. Every order ships with a card asking what we should fix.

Why small runs

Small-batch manufacturing costs more per pair than a factory run of fifty thousand. We are doing it anyway, for now, for a few reasons.

First, we are new, and we do not yet know everything the booties need to be. Small runs let us change the pattern between batches when the feedback says to. A big offshore run locks the design for a year.

Second, proximity. When the sewing happens nearby, problems get fixed in days instead of months, and we can see every step.

Third, control over the waterproofing. Waterproofing is a process, not a material, and we want to watch it happen.

Fourth, it fits what we are selling. Booties for a Pacific Northwest winter, made in the Pacific Northwest, by people who have the same winter. Wet days are outdoor days.

Being honest about where we are

We are a new brand. The first run is small, the price, $39.99 a pair, reflects making booties this way, and our materials come from suppliers rather than from a factory of our own. "Made in the Pacific Northwest" means the cutting, sewing, finishing and packing happen here, in and around Hood River, Oregon. We think that is the right thing to be clear about.

We will also have problems we have not found yet. That is why returns are simple: 60 days to return a pair, and free size swaps if you guessed wrong. And it is why we would rather have you tell us than quietly stop using them.

What you can expect from a pair

  • Waterproof crawling booties, made for babies who get around on hands and knees.
  • Worn over a rain suit: suit first, then the booties.
  • Two sizes, 6 to 12 months and 12 to 18 months.
  • A size card and a request for feedback in the box.
  • 60-day returns and free size swaps.

The booties are open for preorder in the shop at $39.99: pay now, we email the ship date, and you can get a full refund any time before shipping. If you run a store and want to carry them, the wholesale details are on our wholesale page.

FAQ

Where are Newt Boots made?
Newt Boots are cut, sewn, finished and packed in the Pacific Northwest, working with small local sewing shops. The company is based in Hood River, Oregon.
What makes Newt Boots waterproof?
A waterproof outer and seams built to keep water out, checked on every pair before shipping. We will publish full construction details once the first production run ships.
Are the materials made in the US?
The sewing and finishing happen in the Pacific Northwest. Some materials are industrial inputs we buy from suppliers.
Why are small-batch booties more expensive?
Cutting and sewing by hand in small runs costs more per pair than a large factory run. In exchange we can change the design between batches and check every pair.
What if I order the wrong size?
Swap it. Size swaps are free, and any pair can be returned within 60 days. Preorders can be refunded in full at any point before they ship.
The Newt Boots field desk
Parents and outdoor-business owners in Hood River, Oregon. We make waterproof crawling booties and spend a lot of time outside in the rain. About us.

Keep reading.

All field notes